一、基本简历

    李良（1987年），男，2018年至今，南阳师范学院机电工程学院讲师，主要承担机械专业课程的教学，主要研究方向为功能复合材料加工及应用研究。

        2006-2010河南理工大学材料科学与工程本科，2010-2013河南理工大学材料科学与工程硕士，2013-2016室兰工业大学创成机能工程博士。2016-2017室兰工业大学环境友好材料中心博士后研究员。

二、教学科研

     1.主讲课程    机械原理

      2.承担的实践教学 机械原理实验课程、指导本科生毕业论文。

      3.发表的部分学术文章

（1）Li Liang, Hirai Shinji, Yuan Haibin, Influences of Eu₂O₃ characters and sulfurization conditions on the preparation of EuS and its large magnetocaloric effect, Journal of Alloys and Compounds, 2016.12.5, 687: 413~420.

（2）Li Liang, Hirai Shinji, Yuan Haibin, Influences of Yb₂O₃ characters and sulfurization conditions on the preparation of Yb₂S₃, Journal of Alloys and Compounds, 2015.1.5, 618: 742~749.

(3)LiLiang,Zhou Aiguo*, Wang Libo, Li Shangsheng, Wu Dongxu, Yan Chengqi,In-situ synthesis of cBN-Ti₃AlC₂composites by high temperature and high pressure technology, Diamondand Related Materials, 2012.9, 29: 8~12.

(4)LiLiang,Hirai Shinji, Tasaki Yohei, Synthesis and sintering of samarium richSmS_xand its electrical property, Journal of Rare Earths, 2016.10, 34(10):1042~1047.

(5)LiLiang,Zhou Aiguo, Xu Lin, Li Zhengyang, Wang Libo, Synthesis of high pureTi₃AlC₂and Ti₂AlCpowders from TiH₂powders as Ti source by tube furnace, Journal of Wuhan University ofTechnology-Mater. Sci. Ed., 2013.10, 28(5): 882~887.

(6)LiLiang,Wang Hongying, Zhou Aiguo, Nonlinear elastic deformation of magnesiumand cobalt by Preisach-Mayergoyz model, Transactions of NonferrousMetals Society of China, 2012.9, 22(9): 2220~2225.

(7)周爱国,李良,一种钛硅碳结合立方氮化硼超硬复合材料,2014.6.18,中国，ZL201210123454.9